Lighting - Ring Lights
Our Ring Lights offer shadowless illumination, intensity, power and 5x lifetime over fluorescents. Ring Lights are essential for lighting specular or diffused surfaces. Our Metabright Ring Lights are built with high density LEDs that create bright illumination of surfaces for a wide spectrum of Machine Vision inspection purposes.
VLT Ring Lights are specially designed to project an even 360 degree overlapping ring of light from camera to lens. In most Machine Vision front lighting applications our ring lights are a simple, low cost solutions to camera lighting.
All of the Ring Lights we offer for Machine Vision are just as robust and employ proprietary thermal management technology to dissipate internal die temperature externally. Some of our Ring Lights provide the ability to mount the Ring Light directly on the camera, because of three 1/4-20 tapped holes and our Ring Lights are compatible with most camera brackets for direct mounting.
RING LIGHTS (DIRECT LIGHTING)
These Ring Lights for Machine Vision are equipped with high-density LED arrays in a ring shape. Direct light is radiated with focus on the center of the workpiece from any angle.
LDR2 Series;
SQR Series.
LOW-ANGLE RING LIGHTS (DIRECT LIGHTING)
These Low-angle Ring Lights for Machine Vision provide light from a low angle to the center section. The edges of the workpiece and any engraving/damage on the metal surface can be highlighted clearly.
LDR2-LA Series;
LDR-LA1 Series.
RING LIGHTS (INDIRECT LIGHTING)
These Ring Lights achieve uniform illumination through diffused light. They are ideal for Machine Vision applications where the entire workpiece must be illuminated evenly.
HPR2 Series;
LFR Series;
LKR Series.
LOW-ANGLE RING LIGHTS (INDIRECT LIGHTING)
These Low-angle Ring Lights for Machine Vision allow the edges of the workpiece and engraving or damage on surfaces to be detected through low-angle diffused light.
FPR Series.
NEAR AXIAL RING LIGHT
Our near axis Ring Light provides extreme intensity lighting for working distance in Machine Vision. Our Ring Lights can be configured for wavelength and other specifications.
MB-RL Series;
MB-DRL Series.
HALF CIRCLE OFF-AXIS RING LIGHTS
The off-axis Ring Light (darkfield) provides a near horizontal plane of light, useful for highlighting surface defects. The half circle is flexible to illuminate a fixed object at a desired angle and provides lighting from a low angle, ideal for Machine Vision.
OARL-SC2 Series.
2 RING OFF-AXIS RING LIGHTS
This MetaLightâ„¢ two ring off-axis Ring Light provides a near horizontal plane of light which is useful for highlighting surface defects, illuminating specular surfaces, and side lighting prominent target features. An additional one ring of LEDs at a larger incident angle allows flexibility in target illumination. Our Ring Lights can be configured for wavelength and other specifications.
DOARL202 Series.
For more information and advice please contact us through an inquiry.
APPLICATIONS
Machine vision;
Label identification;
Direct part marking identification;
Surface inspection and finishes;
Microscopic stage illumination;
Solder joint inspection;
Components identification;
Molded part features;
Close-up, near-shadowless single light illumination applications.
FEATURES
Ideal for Machine vision applications;
Exclusive prealignment process aims and then thermally pots each LED;
Configurable for various wave lengths including IR, UV and RGB;
Continues, dimming, and strobbing controllability modes;
Homogenous light output;
Provides ON-axis illumination;
Solid one-piece machined aluminum housings and thermal potting assures long life performance even in rugged environments.
Read less more ...